Pouring Machine Filling Water Treatment Equipment

• Certification: ISO9001, CE
• Salt Rejection Rate: 98.0%
• Application: Industry
• Capacity: 1-100t/H
• Trademark: huikang
• Origin: Shandong
• Model NO.: HK-006

Product Description

Bottle washer (Bottle washer), also known as liquid filling machine is the use of electric, crank, piston structure designed automatic quantitative liquid sub-machine, suitable for hospital preparation room, ampoule, eye drops, a variety of oral liquid, shampoo and Quantitative filling of various water agents; also can be used for a variety of chemical analysis of various liquid quantitative continuous liquid, especially for large, medium and small pesticide plant liquid packing.


The main parameters

Motor power: 250W / 220V (single phase)

Number of flushing holes: 12 holes

Bottle size: 250cc / 500cc

Wash bottle speed: 1800 bottles / hour

Dimensions: 1000 × 600 × 1000 mm

Speed: ≤ 36000 bottles / hour;

Water pressure: ≥0.2MPa;

Compressed air pressure: ≥0.5MPa;

The first bottle water temperature: 40 ~ 50C; pressure: 0.15 ~ 0.25MPa;

The second bottle water temperature: 65 ~ 80C; pressure: 0.15 ~ 0.25MPa;

The working principle of this paragraph

1.1 by mechanical way to wash the bottle in the fixed track on the flip, with different temperatures of hot water by the central distributor of the bottle spray, and then blank line titration, remove the residual water in the bottle.

1.2 The water after the bottle is returned from the collection tank to the tank for recycling.

1.3 When the tank level below the liquid level when the automatic pay water.

The process of folding

Into the bottle into the bottle screw empty flap the first hot water spray (ClO2 water)

The second hot water spray (ClO2 water) blank line titration empty flap out the bottle

Folding water filter system

4.1 water filtration system for the two sets of two-stage filter;

4.2 process parameters: the first level for the pre-filter, pore size 4.5um (filter: 5);

The second level for the fine filter, aperture 0.45um (filter: 5);

Fold the editing process

General: a) production in the process of ensuring that the microbiological conditions of the production process meet the requirements of the process;

b) the operator in strict accordance with the operating procedures and work to ensure continuity of production;

c) strict quality control must be performed on the filling process;

d) in the production process of special circumstances, to ensure that the production process equipment, environmental health standards.

5.1 before the boot to check the steam pressure one by one, washed bottle water filtration system is normal;

5.2 with 0.1MPa pressure steam on the bottle washing machine sterilization 20 to 30 minutes, water tank to add water;

5.3 Select the production process, when the water temperature to meet the requirements, began to enter the bottle;